Automatic feeding system for foaming silicone roll rolling process Liquid silicone foam foaming machine

Functions and parameters of Jiunai mechanical silicone foam foaming machine: 

1. The entire machine's stainless steel frame is convenient for cleaning, maintenance, and upkeep;

2. Proportional adjustment: mechanical gear ratio/electronic gear ratio. The mixing ratio can be adjusted slightly on the touch screen at 1:1;

3. Mixing method: high-speed dynamic spiral mixing, uniform mixing;

4. Two stainless steel raw material barrels with an effective volume of 100L, with a funnel shaped bottom for smoother feeding. The material tank is designed with two layers, and the interlayer can be connected to the chiller;

5. Customized stainless steel simple tank cover, which can be quickly opened for manual and quick addition of materials;

6. Buckets A and B adopt a bottom feeding method, with an increased diameter of the bottom feeding port and a direct connection with the feeding port of the metering pump, which is convenient for maintenance and repair;

7. The A and B material barrels are stirred by electric speed control motors to prevent material sedimentation;

8. PLC programming control, imported full touch color control screen, with parameter locking function on the screen to prevent unrelated personnel from modifying parameters;

9. Servo motor and reducer drive Taiwan's high screw metering pump, capable of continuous feeding and proportional accuracy;

10. Double layer jacket is installed at the pushing position of the screw pump, with constant temperature control for water circulation;

11. Customized 1M long double-layer stainless steel pipeline at the discharge port of the metering pump, with interlayer connection for constant temperature control of water circulation in the chiller;

12. Learning instructional memory quantification, 1-99 sets of quantitative memory;

13. Customized special dynamic mixing gun head, with the gun head motor connected by belt deceleration, effectively preventing the heat transfer of the motor from affecting product quality; The valve body structure is designed with a combination design, which is convenient for disassembly and maintenance in the later stage; Spray Teflon treatment on the inside of the mixing blade and gun cup for easy cleaning; The gun cup is designed with a double-layer structure, which can be connected to a chiller for cooling treatment of the gun head, and the stirring bearing increases water cooling;

14. The equipment is equipped with an automatic circulation function. When the machine is shut down, the raw materials in the pipeline automatically circulate back into the raw material barrel, preventing the raw materials from settling and layering in the pipeline and stabilizing the pressure;

15. Automatic alarm function, real-time display of fault screen;

16. The equipment is equipped with an automatic cleaning function, equipped with a cleaning solvent tank with an effective volume of 15L. The cleaning adopts a three stage one button high-pressure atomization automatic cleaning method (due to the high viscosity and wall adhesion of foam silicone, the cleaning function cannot clean it completely);

17. The gun head is equipped with a heavy-duty lifting arm combination, and quick function buttons such as feeding, cleaning, and emergency stop are installed at the gun head.

Machine size:aboutone thousand and four hundredMM*one thousandMM * 1five00MM               Usage power:aboutfive thousandW

Working air pressure: 4-7KGTracheal joint: 10 cm tracheal quick insertion (provided by the customer)

Working voltage:380V50Hz power cord standard configuration: 2.5M

Total weight of the machine:aboutthree hundredKG

Dongguan Jiunai Machinery Co., Ltd. was founded in 2012 and is located in Sanhe Industrial Park, Xiagang Community, Chang'an Town, Dongguan City, Guangdong Province.

The company mainly operates dual component infusion equipment, automatic proportioning vacuum infusion equipment, and micro foaming equipment. The product is exported to Vietnam
India and other Southeast Asian regions!

Dongguan Jiunai Machinery Co., Ltd., formerly known as Taiwan Jiunai Machinery Co., Ltd., has 12 years of experience in the development and production of dual component fluid control equipment. The company has gathered R&D engineers and production management personnel who have been working in factories in Taiwan for many years, as well as several senior technical consultants and an after-sales team. Integrating product research and development, production, sales, and after-sales service. Multiple core technologies have been recognized and highly praised by multiple enterprises!

In addition, the company can also provide a complete set of technical solutions and 24-hour dedicated services, as well as the transformation, upgrading, and upgrading of imported equipment, according to the specific process requirements of customers.

Jiunairen adheres to the business philosophy of "honesty first, quality first, and thoughtful service", bearing in mind the mission of "liberating humanity with machines", and providing customers with excellent infusion equipment and thoughtful services!

And after-sales service commitment
1. With a one-year warranty and lifelong maintenance, our products undergo a series of strict quality tests before sale. After proper installation, normal operation and maintenance, they operate safely and reliably. The provided equipment meets the required specifications and performance in all aspects.
2. The customer service department has a 24-hour hotline telephone service, allowing users to receive timely technical support and services during the use of the equipment. For equipment malfunctions, our company strives to solve equipment problems for users within 24 hours.

Free training for on-site operators
After the installation and debugging of the equipment, our technical personnel will provide training to on-site operators, mainly focusing on the knowledge of installation, use, and maintenance, so that on-site operators can correctly operate the equipment and carry out daily maintenance and troubleshooting of common faults.