Overview
| brand | Voris | weight | one thousand two hundred and fifty |
| purpose | EPS cold press | Processing customization | yes |
| model | GP-400 | Product Usage | Material mixing |
| Motor power | 15 (kw) | Overall dimensions | 2500 (mm) |
| after-sale service | One year warranty for the entire machine | Screw length | one thousand and ninety |
| Screw diameter | one hundred and thirty-eight | Screw speed | one hundred and ten |
| Crusher shaft | two | Crushing power | 1.5 * 2 |
| control mode | PLC | ||
Product Details
EPE foam surface crust cold press EPS foam cold press
The foam cold press is a mechanical equipment that extrudes the foam plastic according to the principle of spiral rotation to generate pressure, and carries out cold compression treatment on it.
The volume of foam is reduced and the density is increased, which is conducive to foam recycling and polyurethane foam landfill treatment.
The foam cold press is divided into EPS foam cold press and polyurethane cold press, which are respectively applicable to the recycling and treatment of EPS/EPP/EPE foam and refrigerator polyurethane foam. Polyurethane foam is denser than EPS/EPP/EPE foam, so polyurethane foam cold press is used for processing. The effective density compression ratio reaches 10-16:1, which is convenient for polyurethane foam landfill treatment. EPS/EPP/EPE foamed plastic is compressed by foam cooling machine, and its density increases, forming a square block, which is convenient for transportation and storage.
The foam cold press adopts the principle of screw driven compression mechanism, which effectively solves the problems of EPS/EPP/EPE foam plastics and polyurethane foam plastics, such as light weight, large volume, difficult recovery, inconvenient transportation, high compression ratio of equipment, no need to add other chemical products and no odor during cold pressing.
Instructions for use
1. Before starting the machine, check whether the mechanical and electrical parts of the equipment are normal.
2. Perform corresponding operations on the equipment according to the instructions on the operation panel
3. Conduct debugging work on the equipment.
4. Set equipment operating parameters
5. After completion of various works, the equipment will run, and the foam plastic items will be compressed into blocks through the crushing mechanism compaction mechanism molding mechanism in the foam plastic feeding equipment
Trading Area
Global