Magnetic flap Level sensor pressure resistant magnetic flap Level sensor material professional supply after-sales guarantee Shanghai Automation Instrument No. 5 Factory

Working principle of side mounted magnetic flap Level sensor: the bypass pipe is extended on the outside of the tank, and a liquid level indicator is installed outside the bypass pipe. The float with magnet is put into the bypass pipe. Because the magnetic color chip is installed with a magnet opposite to the magnetic property of the float, when the float rises, it will attract the magnetic color chip to flip, and the color of the magnetic color chip will turn from white to red (or silver to gold) to indicate the actual liquid level height. Characteristics and Applicable Place: Suitable for high temperature, high pressure, strong acid, strong alkali, and explosion-proof requirements. The structure is simple, reliable, and durable, and multiple optional accessories can be added to make control easier. Operating principle of adding liquid level transmitter and side mounted magnetic flap Level sensor:

An extension bypass pipe is installed on the outer side of the barrel groove, and a liquid level indicator is installed outside the bypass pipe. The floating ball with a magnet is placed inside the bypass pipe. As the magnetic color plate contains a magnet that is opposite to the floating ball's magnetism, when the floating ball rises, it will attract the magnetic color plate to flip. The color of the magnetic color plate will change from white to red (or silver to gold) to indicate the actual liquid level height.

Characteristics and applicable location:

Suitable for high temperature, high pressure, strong acid, strong alkali, and explosion-proof requirements, with a simple structure, reliability, and durability. Multiple optional accessories can be added to make control easier. Install a liquid level transmitter and magnetic switch, which can be installed or adjusted at any time without stopping the machine. If the power supply is interrupted, the magnetic switch on site will not be affected, with high accuracy. Add a color chip of different colors every 10 centimeters to make the liquid level easy to identify. Suitable for dyeing and finishing equipment, wastewater treatment, power plants, chemical equipment, hot kerosene boilers, and petrochemical industries.

GM-UFZ side mounted magnetic flap Level sensor is installed on the extension pipe outside the tank, and the liquid level inside the tank can be clearly known by the flap indicator. A magnetic switch can also be installed on the outside of the bypass pipe as an electrical contact signal output, or a liquid level transmitter can be installed for remote liquid level signal transmission and control. The Level sensor is a reliable safety instrument. Due to its magnetic coupling isolation sealed structure. Especially suitable for detecting flammable, explosive, and corrosive toxic liquid levels. This makes the liquid level detection method in the original complex environment simple, reliable, and safe. The Level sensor has the direct reading characteristic of local display. It is unnecessary to combine multiple sets of Level sensor. Having a single unit for full range measurement. The device has the advantages of fewer holes, clear display, eye-catching markings, and intuitive readings. When the magnetic flap Level sensor is directly equipped with a display instrument, the intermediate transmission of signal detection of the system can be omitted to improve its transmission accuracy.