Overview
| brand | Jichuang | model | JC-1000-HSM |
| series | packing | ||
| Part status | type | Diffusion silicon pressure transmitter | |
| Input Range | output | ||
| quarantine | response time | ||
| accuracy | Voltage - Power Supply | ||
| Installation type | Termination Style | ||
| working temperature | Certification Authority | ||
| Minimum packaging quantity | Processing customization | no | |
| Measurement medium | Gas, liquid | measuring range | -0.1-100MPa (customizable within the range) |
| Accuracy level | 0.5 level, 0.2 level | output signal | 4-20mA, Hart protocol, RS485 |
| Explosion proof level | BT6 | Protection level | IP65 |
| supply voltage | 12V~36V | Interface size | M20 * 1.5 (customizable) |
| quantity | nine thousand nine hundred and ninety-nine | ||
Product Details
As we all know, there are fire hydrants in residential areas and work places to prevent sudden fires. When a fire breaks out, it should be turned on in a timely manner to avoid causing significant losses. As we all know, in a property in Hangzhou, due to inadequate firefighting measures, there is no way to provide water when a fire breaks out, resulting in significant losses. How to ensure the normal replenishment of water in the fire protection system, the pressure transmitter plays a crucial role in this process.
Below is an introduction to a well-known property in Shenzhen. Firstly, there is a water storage tank underground, which is filled with water and then supplied to the fire hydrant on the roof. When a fire occurs, the water source is provided to replenish the water. During this period, our pressure transmitter is used to conduct an hourly water pressure test. The conventional floor is located on more than ten floors, We will use a 1Mpa pressure transmitter for water pressure measurement and upload the data to the detection center in real time. Normally, the water pressure is within a reasonable range. When the water pressure suddenly changes significantly, we will alarm for maintenance in a timely manner. There may be a water shortage situation, and physical personnel will promptly maintain the normal production supply of water.
Another type is used in the spraying pipeline. Once encountering an open fire, the spraying device will be activated to spray water, and the pressure inside the water pipe will inevitably decrease. Therefore, using a pressure sensor to detect the water pressure inside the spraying pipeline can reflect whether the spraying has been started. If it is started, the pressure pump will also be activated to enhance the water pressure inside the firefighting pipeline, ensuring water supply for firefighting.