Supply * * * brand Audis RFID electronic tamper proof labels, with * * frequency tamper proof electronic label model ADS-837 repeated 10 times for reading and writing

Vehicle management electronic tags, RFID electronic tamper resistant tags, * * * frequency tamper resistant electronic tags, RFID tamper resistant tags, Car glass tamper resistant electronic tags and other main products. For more information about related products, please visit our company * * www.szaudes.com or call 0755-3355 8385, and we will be happy to serve you. Thank you!

The RFID anti disassembly electronic tag Ads-837 is a * * * anti disassembly RFID electronic tag designed by Odes Electronics Co., Ltd. specifically for vehicle management, fully compliant with the international ISO 18000-6C standard protocol. Its operating frequency is UHF (860-960MHz). Anti dismantling labels are mainly applicable to areas such as urban intelligent traffic management, toll collection on highways, customs vehicle entry and exit management, and intelligent community parking lots. The anti disassembly RFID electronic tag using passive microwave signals is not affected by recognition on the metal film of car windshields, and can read * * * at a distance of up to 15 meters. The RFID anti disassembly tag has a very wide frequency band and is suitable for multiple regions. In addition, it is also suitable for fast response performance at 120km/h, 512bits memory capacity, * * * 64 bits ID number, and can be flexibly developed and applied. It can read and write multiple tags at the same time (up to 200/s or more), Without being limited or affected by the number of labels in the workspace, the 448bit storage area is available for users to perform encrypted read, write, erase, and write operations, and also opens up a ******** word area for * * * users. The anti disassembly RF electronic tag design eliminates the need for battery power, and the storage area can be repeatedly erased more than 100000 times. The effective service life is over ten years, and * * * is even higher.

When the tamper proof paper label is combined with Car glass, the readability of * * * can be obtained. The label uses a composite paper substrate internally, and the heat sealed paper packaging has characteristics such as * * * and * * *. Once the tamper proof paper label is removed from the vehicle windshield, the RFID electronic label immediately becomes invalid and cannot be reused, thus preventing illegal removal of the label. The use of anti disassembly paper labels in conjunction with the Audes-703 series reader/writer provides better results, making it suitable for multi label reading with high performance.

Installation and use

The Ads-837 anti disassembly label has * * * bonding strength and good packaging performance, which can replace some traditional mechanical connection methods and play a role in structural fixation. In addition, the label also has properties such as UV resistance, solvent resistance, and wide temperature range adaptation. Even at high temperatures of 70 ℃, it still maintains normal bonding strength and is suitable for installation on surfaces with a certain degree of curvature. It can be used outdoors. If you tear off the protective film of the Double-sided tape on the back of the label, you can firmly stick the label to the front windshield of the car. Once you remove the RFID tamper proof label, it will be scrapped immediately.

technical parameter
Packaging material: paper
Working temperature: -20 ℃~+85 ℃
Working frequency: 860-960MHz

Compliant with standard: ISO 18000-6C EPC G2***
Reading distance: 0-18mIt depends on the gain size of the reader antenna or the usage environment
Available data area: 916 bytes
Identifier (UID): 64 bit
Working mode: R/W (readable and writable)
Applicable speed: 120km/h
Data storage time:>10 years
Repeatable erasing times: 100000 times
Conflict prevention mechanism: suitable for multi label reading

Size: 113 × forty × 10 mm