Overview
| Pellet output (kg/hr) | ≤ 170 | Motor Power (kW) | Seven point five |
| Oil tank capacity (L) | Ghty | Hydraulic oil type | L-HM 68# |
| Pipe Connection | G5/8" | Gas Exhaust (mm) | DN32 * 2 |
| Net Weight (kg) | Three hundered and two | Occupied Acreage | 0.74m ² |
| Dimension (mm) | 1080 * 680 * 1320 | Electric power* | 380V AC 3Ph+N |
| Working Noise | 70 dBA -80 dBA | Working Pressure | ≤ 180 Bar |
| Pellets Mould* | 16mm mold (optional 3, 6, 9, 13, 16, 19mm) | Density of Dry Ice | ≤ 1550kg/m ³ |
| LCO2 Pressure | 15-20 Bar ≥ 66ppm | LCO2 Consumption | ≥ 420L/hr |
| Control method | Colored touch screen&&Automated production | ||
Product Details
|Equipment Introduction
- FromKejie CompanyDeveloped and producedFOKIT ™- 200mSmall and medium sized double cyclinder dry ice production machine is a compact, compact, and conventional automatic dry ice granulation production machine;
- Device is PCLFully automatic typeThe dry ice particle manufacturing machine can choose single cyclinder independent production with a production capacity of 100kg ± 10% per hour, or double cyclinder parallel operation with a production speed of 170kg ± 10% per hour;
- Can provide mold base sizes of 3, 6, 9, 16, and 19mm Simply replace the mold base to produce the required dry ice specifications according to demand;
- The body size is designed according to the golden ratio of 1:0.618, covering an area of only 0.74 square meters (the size of a desk);
- The operation interface is designed with a 135 ° embedded plane, allowing operators from 160cm to 200cm in height to easily operate the equipment, which is online with economic design;
- Provide necessary accessories for production, such as power cord, inlet pipe, mold base, etc., without the need to purchase additional accessories for production
|Factory standard configuration
- 3 standard production mold base (3mm * 2/16mm * 2)
- 3-meter standard industrial waterproof power cord * 1
- 2 meter high-pressure and low-temperature stainless steel braided tube * 1
- 3 meter exhaust gas extension pipe * 1
- Mold baffle * 2
- Dry ice distribution pipe * 2
- Stainless steel ice shovel * 1
- Antifreeze gloves * 1
- Safety Production and Operation Manual * 1
- San Bao Service Warranty Card * 1
|technical parameter
- Equipment size: 1080 × six hundred and eighty × 1320mm (length, width, height)
- Net weight of equipment: 310kg
- Equipment power: 7.5kw
- Working pressure: ≥ 18mpa
- Dry ice production: ≤ 170kg/hr
- Fuel tank capacity: 80L
- Power requirements: 380V AC/50-60Hz/32A CEE-6h/IEC60309 (export provides voltage requirements of 200v~480v)
- Power connection requirements: 3Ph+N+PE (three-phase five wire/four wire)
- Working noise: 70 dBA -80 dBA
- Pipeline connection: G5/8 "CGA540 C-type interface
- Filling pressure: 1.2-2.3mpa, at least 66ppm or dew point -45 ℃
- Raw material consumption: 400-500 L/h (density 1.101g/cm)
Trading Area
Global