Coal slurry vibrating screen ultra-high frequency dewatering screen machine

Coal slurry vibrating screen ultra-high frequency dewatering screen machineMud dewatering vibrating screen is a professional equipment that dehydrates and quickly dries materials with high moisture content, such as fine sand, mud, sediment, washed sand, clean coal, and wet coal from coal washing plants. The manufacturer uses high-quality materials (manganese steel, carbon steel, stainless steel) and precision welding technology to manufacture a durable and wear-resistant straight line dewatering screen machine!

Product features:

1. Adopting the principle of self synchronization, the motor drives the vibrator through a tire coupling, with a simple structure and low working noise. High working frequency, high vibration intensity, low moisture content of products on the screen, and high unit processing capacity can achieve high solid recovery rate when used for tailings dewatering.

2. In order to adapt to the different properties of tailings, the amplitude of this screen can be adjusted by adjusting the angle between the main and auxiliary eccentric blocks to meet the dewatering effect of tailings with different properties. The pre dehydration sieve plate is installed at a 45 degree angle to the horizontal, and the negative inclination angle of the dehydration sieve plate is installed to increase the dehydration area and promote the rapid dehydration of materials to form a filter layer.

3. To facilitate maintenance and replacement of the screen surface, the screen surface is installed in a rail seat style. The use of polyurethane elastic screen surface, with high porosity and elasticity, is conducive to dehydration. The side pressure plates on the screen surface are all made of polyurethane material, with a long service life, reliable fixation of the screen surface, and effective protection of the screen frame side plates from material erosion.

4. The connection between the side plate and the crossbeam adopts torsion shear high-strength bolts without welding seams, avoiding the problem of side plate cracking caused by welding stress.

6. The vibrator is a block eccentric unit structure, which is easy to disassemble and maintain. The bearing adopts vibration equipment bearings to avoid premature damage due to bearing heating.

7. The main welded structural components all adopt surface treatment, with a beautiful appearance. The surface of the lower beam is coated with anti wear coating to prevent premature wear and fracture of the crossbeam. Adopting steel spiral springs for vibration reduction, greatly reducing the dynamic load of the screen machine on the foundation.

8. By using finite element structural analysis software, the strength, stiffness, and stress of the screen frame are ensured to be reasonable, with light weight and low energy consumption.

9. Users can be equipped with a structure with a base frame and a feeding box according to their needs, which is convenient for installation and debugging.