Supply of customized cooling tower accessories for Bahp cooling tower packing and nozzle suspension packing

A water collector designed according to the impact separation method is installed at the end of the filler, effectively controlling the loss of floating water within five thousandths. It is easy to install, clean, and transport. The heat dissipation filler adopts adhesive or hanging type, which is easy to install, easy to clean, and successfully solves the problem of deformation caused by a large amount of attached scale and self weight, and the scale becomes more severe and difficult to clean after deformation. The filler has good flame retardant performance, and after testing, the flame retardant oxygen index index index is greater than 40.The structural design has a guiding effect, has a good uniform air distribution effect, improves and stabilizes the heat exchange intensity of water and air, and the inlet end is inclined at a 30 degree angle, reducing the loss of drift water. The equal spacing combination facilitates the formation of a large area of flowing water film perpendicular to the surface of the water flow, promoting the contact surface of the large airflow. The built-in louver air inlet is formed on the packing, making the distribution of the air water ratio inside the packing uniform and reasonable. The water remover and packing molding are integrated, effectively removing water droplets from the humid and hot air and returning to the tower, greatly reducing the loss of floating water. Floating water loss rate less than 0.001%