Overview
| Does it support processing customization | Imported or not | ||
| Fuel consumption per 100 kilometers | Mixing cylinder capacity | ||
| Mixing depth | Inclination angle of mixing drum | ||
| Mixing drum speed | Rod head length | ||
| Shelf life | Pump shaft position | ||
| Vertical height of boom | Vertical depth of boom | ||
| Horizontal length of boom | Number of arm joints | ||
| Transmission type | material quality | ||
| Forming pressure | Forming cycle | ||
| stroke | Discharge residual rate | ||
| Outlet height | Discharge speed | ||
| Storage hopper capacity | processing capacity | ||
| Chassis Model | Motor power | ||
| current | voltage | ||
| Independent height | Rated discharge capacity | ||
| Rated feed capacity | Engine power | ||
| Engine model | Stone size | ||
| Degree of crushing | Pitch angle | ||
| Auxiliary brake type | Working radius | ||
| Working air pressure | work efficiency | ||
| Water pump model of water supply system | Aggregate size | ||
| Aggregate size | Aggregate conveying capacity | ||
| Maximum aggregate size | specifications | ||
| Track gauge | Gas consumption | ||
| Cross slope error | Recovery amount | ||
| Concrete outlet pressure | Concrete pipe diameter | ||
| Type of concrete machinery | Theoretical conveying capacity of concrete | ||
| Maximum outlet pressure of concrete | Excitation force | ||
| Excitation frequency | Number of poles | ||
| Mixing power | Mixing tank conveying capacity | ||
| Mixer model | Mixing drum length | ||
| Mixing shaft speed | Height of the upper opening of the feeding hopper from the ground | ||
| Feed inlet height | Feed speed | ||
| Net weight | Directional control method | ||
| control mode | Measurement accuracy of asphalt powder | ||
| granularity | Hopper lifting speed | ||
| Track width/rear | Track width/front | ||
| horsepower | Number of vibrations per minute | ||
| Is the end hose installed | Gradient | ||
| Climbing ability | Climb box spacing | ||
| displacement | Supporting host model | ||
| Balancing weight | Flatness | ||
| Front wheel axle | Sand conveying capacity | ||
| Sieve size | Loading height | ||
| productivity | service life | ||
| Applicable scope | Applicable models | ||
| Applicable Water–cement ratio | Delivery distance | ||
| Conveying pipe diameter | Conveying pipe diameter | ||
| Inner diameter of conveying pipe | Conveying distance | ||
| Delivery pressure | Water pump flow rate | ||
| Cement silo | Tower body section | ||
| Paving thickness | Paving width | ||
| Concrete slump | Overall dimensions | 5400 * 2250 * 3000 | |
| System flow | system pressure | ||
| Discharge method | New and old degree | ||
| Number of trips | Rotation method | ||
| lift | Number of impellers | ||
| Scope of use | Effective lifespan | ||
| Vibration frequency | amplitude | ||
| Compacted thickness | Leg span | ||
| weight | Wheelbase | ||
| Main vibration form | Rotor capacity increase | ||
| Installed capacity | Loading quality | ||
| Total power | Traveling mechanism | ||
| Composition structure | Maximum theoretical concrete conveying capacity | ||
| Maximum pressure | Maximum speed | ||
| Dust concentration during operation | brand | Shandong Concrete Engineer | |
| purpose | Concrete mixing and transportation | model | 3 parties |
| Mixing motor | Italian SAI motor, high-pressure plunger | Excavator section | Using pilot operation |
| tyre | Linglong 825 | Actual discharge | 3m3 |
| Mixing pot size | 2250mm * 850mm | Transmission | 280 dual high and low speed |
| Swing motor | National standard excavator rotary motor | Driver's cab | Fully enclosed, luxurious seats |
Product Details
Product configuration:
This is a multifunctional excavator mixer truck independently developed and produced by Shandong Concrete Machinery Co., Ltd.
Function: Automatic feeding, watering, mixing, transportation, unloading, and built-in excavator function (the hook part can be easily replaced with a excavator)
Clamping hopper, crushing hammer, spiral drill, rotating grab and other accessories); Stirring: 10 minutes per pot; Mixing pot capacity: 3.2 cubic meters;
Actual discharge; 3 cubic meters; Engine: Dongfang Hongguo III engine; Walking mode: wheel four wheel drive; Driving mode: bidirectional driving; Excavator excavation depth: 2.6 meters;
The product comes with a large capacity water tank, a high-power self priming centrifugal pump, a pumping timer, a 360 ° rotation in the driver's cab, and a wide operating range. The unloading is equipped with a wireless remote control.
Product features:
The existing concrete production process involves loading sand, cement, stones, water, and other materials in proportion into traditional mixers,
The mixer is driven by an AC power source to mix concrete raw materials. After completion, the finished concrete is discharged from the mixer,
Load the transport vehicle and transport the concrete to the place of use. The process is cumbersome, time-consuming and labor-intensive, and requires AC power supply, which is not conducive to field construction,
It also increases energy consumption.
The purpose of the present invention is to provide a new type of machinery for addressing the shortcomings in the concrete construction process mentioned above.
A single machine can achieve the functions of loading, mixing, and unloading in traditional concrete construction operations, accelerating work efficiency.
| Qianyu Wangpu | https://46139.qianyuwang.com/ |