Cold Core Box Vertical Parting and Shooting Machine Dual Station Large Size Mold Coating Sand Casting

The Z86F series core shooting machine adopts vertical parting shooting systemSand coreAnd appearance. The overall structure is mainly composed of four major components.

1. Column components: The upper structure of the equipment mainly consists of beams and columns. The sand supply and gas supply system for core making is composed of sand cylinders, sand buckets, sand valve components, compression cylinders, and other components installed on the crossbeam.

2. Sand shooting device: consisting of sand cylinder, air valve, sand cylinder frame, shooting head, sand shooting plate and other components. During operation, the sand cylinder is pressed onto the upper plane of the core box by the compression cylinder, and the sand shooting valve is opened for sand shooting. After exhaust and sand shooting, releaseCompression cylinder(Return to the original position) Complete the sand shooting and adding work.

3. Mold base components: mainly composed of moving templates, left and right support plates, guide pillars, guide sleeves, top rods, mold closing cylinders, and other components.

3.1 The entire mold base is installed on the base by left and right support plates.

3.2 The moving template moves left and right along the guide pillar under the push and pull of the mold closing to complete the core making process of mold closing and opening. When the movable template is opened, the top rod on the fixed template is pressed against the top core plate and the sand core is pushed out, which can be easily removed by hand.

3.3 Base: The support, mold frame, column, electric control box, solenoid valve, etc. of the entire equipment are installed on it.