Overview
| Accuracy | ±0.6-1% | Main Application | Corrosive Liquid/Gas |
| Size | DN100-500 | Sensor | Tube/Flange |
| Application | Transportation | Type | Variable Area Flow Meter |
Product Details
Introduction Of TDS-100H-M2+S1 Ultrasonic Flow Meter Clamp on Sensor
We Provide all kinds of measurement instrument include Air Flow Meter, Gas Flow Meter, Coriolis Mass Flow Meter, Oxygen Flow Meter, Digital Water Flow Meter, Emission Gas Analyzer, gas detector, Ultrasonic Flow Meter, Mass Flow Meter, Magnetic Flow Meter.
TDS-100H-M2+S1 Ultrasonic Flow Meter Flow Meter Clamp on Sensor is a flow meter with DN15-700mm, this flowmeter is widely used for measuring liquid and gas including water,sea water,waste water,chemical liquids, oil, crude oil, alcohol, beer, etc.
1. Better than 1% accuracy.
2. 0.2% of repeatability.
3. 4 line LCD display.
4. Positive/negative/net floe totaliser
5. Operate with clamp-on transducers.
6. RS-232/OCT output
7. Ni-MH Battery life for up to 12 hours continuous operation.
Main Parameter Of TDS-100H-M2+S1 Ultrasonic Flow Meter Clamp on Sensor
Parameters
HS
HM
S1
M2
L1
S1H
M1H
Pipe size(mm)
DN15-100
DN50-700
DN15-100
DN50-700
DN300-6000
DN15-100
DN50-700
Pipe size(inch)
1/2"-4"
2"-28"
1/2"-4"
2"-28"
12"-240"
1/2"-4"
2"-28"
Material
Aluminum Alloy
ABS
Special High-Temperature Materials
Frequency
1MHZ
Installation Method
V(N.W)
V.Z
V(N.W)
V.Z
Z
V(N.W)
V.Z
Calibration
Calibrate with the main unit
Magnetism
Magnetic
No Magnetic
Temperature
32℉-158℉(0℃-70℃)
32℉-320℉(0℃-160℃)
Protection Class
IP65
Dimension
(mm)
200×25×25
280×40
×40
45×30
×30
60×45
×45
80×7
×55
90×85
×24
90×82
×29
Weight(g)
250
1080
75
250
650
94
150
Liquid Types
water,sea water,waste water,chemical liquids,oil,crude oil,alcohol,beer,etc.
Suspention Concentration
≤20000ppm, may contain very small amount of air bubbles.
Pipe Material
All metels, most plastics,fiber glass,etc.
Dedicated Shielded Tranducer Cable
Standard length 5 meter ×2, can be extended to 10 meter ×2 or 15 meter ×2
TDS-100H-M2+S1 Specification:
Linearity
0.5%
Repeatability
0.2%
Accuracy
±1% of reading at rates>0.6 ft/s. ±0.5% with on-site calibration
Response Time
0-999 seconds, user-configurable
Velocity
±0.03 ~ ±105 ft/s (±0.01 ~ ±30 m/s), bi-directional
Pipe Size
(15 ~ 6,000mm)
Rate Units
Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.
Totaliser
7-digit totals for net, positive and negative flow
Liquid Types
Virtually all liquids
Security
Setup lockout. Access code needed for unlocking
Display
4x16 English letters
Communication Interface
RS-232C, baud-rate: from 75 to 115,200 bps. Protocol made by the manufacturer. User protocols can be made on enquiry.
Transducers
Model S1 for standard, other models for optional
Transducer Cable
Standard 2x30` (10m), optional 2x1,500` (500m)
Power Supply
3 AAA Ni-H built-in batteries. When fully charged it will last over 10 hours of operation.
90-230VAC for the charger
Data Logger
Built-in data logger can store over 2,000 lines of data
Manual Totalizer
7-digit press-key-to-go totalizer for calibration
Housing Material
ABS. Aluminum alloy protective case
Case Size
3.9"x2.6"x0.8" (100x66x20mm)
Handset Weight
1.2 lbs (514g) with batteries
TDS-100H-M2+S1 Package including:
1×TDS-100H main machine
1 ×M2 sensor(DN50-700mm)
1×S1 sensor (DN15-100mm)
1×Clamp Fixture
1×Tape Ruler
2× 5mCable
1×Power Adaptor
1×Alunimum Case
1× English User Manual
1×Coupling Agent(only one empty bottle)
Photos Of TDS-100H-M2+S1 Ultrasonic Flow Meter Clamp on Sensor
