Overview
| brand | Dongduo | model | TH30F10025C7 |
| Power module type | Number of voltage output groups | ||
| Minimum input voltage | 285-475V | Maximum input voltage | |
| output voltage | 200-1000VDC | Output current (maximum/full load) | 58A |
| Total output power | 30kw | Isolation voltage | |
| conversion efficiency | ≥ 95% | Packaging/Specifications | 435 * 300 * 84mm |
| packing | Certification Authority | CE | |
| Minimum packaging quantity | one | quantity | one |
| encapsulation | carton | Batch number | 001 |
| Input method | Three phase+PE | power factor | Full load ≥ 0.99 |
| standby power | <12W | ||
Product Details
1 Product Introduction
TH30F10025C7 is a high efficiency, high power density, super
AC/DC module with a wide constant power range. This product supports 285VAC-475VAC (line voltage) three-phase four wire system (three-phase+PE) input, with a rated output power of 30kW and a constant power range of 250-1000VDC. The charging module communicates with the main monitoring system through the CAN bus to set the charging module parameters, collect the operating parameters of the charging module, and control the working status of the charging module.
1.1 Product Appearance
The overall dimensions of this module (including connectors, excluding handles and front panel protrusions) are: 437.5mm in length, 84mm in height, and 300mm in width.
1.2 Definition of input/output terminals
2.1 Principle Block Diagram
2.2 Module Features
Input voltage range (AC): 285-475V
Output voltage regulation range (DC): 50-1000V
Working temperature range: -30~+75 ℃
Peak efficiency: ≥ 96%
High power factor: above 1/3 load ≥ 0.99
Low harmonic content: above half load ≤ 5%
Low standby power consumption:<13W
Output constant power function: output 1000-250VDC constant 30kW
Digital current sharing technology, with parallel unevenness of less than ± 5%
CAN bus communication
Quick insertion and removal installation
Short circuit without damage
Intelligent fan speed control
Supporting parallel voltage and current regulation functions
Equipped with comprehensive protection functions
Input overvoltage and undervoltage protection, input overcurrent protection, and phase loss protection
Output overvoltage protection and current limiting protection
Output anti backflow
Environmental temperature detection and protection
Group current sharing function
Support grouping settings for modules in the system, and module output power lines are required during grouping output
Isolated from each other, each module is only connected to the CAN bus, and each group of modules can
Independently controlling its output voltage and current can achieve grouped current sharing output. Suggested number of modules in each group
≤ 24.
