Overview
Product Details
Products Description
Electronic Zinc Alloy Fingerprint Keyless Drawer Cabinet Door Lock
--Product Feature:
1. 20 Fingerprints can be entered
2. Low battery reminder function
3. Simple installation steps , and the fingerprint entry is convenient and fast
4. There is a decoder, so don’t worry about fingerprint recognition
5. Use large-capacity built-in lithium battery, can unlock about 2000+ times, stand by for half a year, and can be charged.
6. High-quality raw materials: Fingerprint collection panel made of ABS or Zinc Alloy or Aluminum Alloy, and lock body made of ABS
Product Name | B-P-02ABX | ||||||
Material | Zinc alloy panel | ||||||
MOQ | 1 | ||||||
USB Charging | Micro | ||||||
Fingerprint Capacity | 20 (Two management fingerprints) | ||||||
Battery | Lithium battery 500mAh 3.7v Fully charged in about two hours | ||||||
Packing List:
1 * Fingerprint panel 1 * Lock body 1 * lithium battery 1 * Fixed plate 1 * Manual 1 * Screw pack1 * Latch
1 * Decoder
Product Usage Introduction
--Administrator Fingerprint Registration
1. Long press for 5 seconds until blue light, release the finger, the fingerprint input start.
2. Collect the same fingerprint 5 times, each time it is successful, the green light will turn on. If the red light is on, it means the collection is unsuccessful.
3.Until the last green light remains on, the fingerprint is entered successfully.
Notes:First of all, the two fingerprints entered at the beginning are the fingerprints of the administrator, and the fingerprints of ordinary users in the following need to be pressed and held for five seconds with the fingerprint of the administrator.
--Delete Fingerprint
1.Long press for 10 seconds until red light flash, the blue light will flash during the period.
2.Release the finger and verify the Administrator Fingerprint3.Long green light and delete successful.
Notes:Delete all fingerprints at once only
--Low Battery Reminder
When the battery voltage is too low , the red indicator light will flash 3 times after unlocking to remind you that charging is required.
--Decoder Instruction
Don’t be careful when the finger is injured or the fingerprint can’t be recognized . After inserting the decoder, click any fingerprint , and the red,green,blue light will flash continuously. If the light is off , the deletion is successful.
--Tips
1.When entering the fingerprint , please collect the finger at different angles to expand the fingerprint database, which can improve the recognition sensitivity when the fingerprint is unlocked.
2.No power can be external USB charging treasure emergency unlock , it is recommended to use after full charge.
Trading Area
Global