Overview
| Warranty | 1 year | Commodity Number | 115 |
| Place of Origin | China | Single package size | 39X28X20 cm |
| Model Number | PHB-1 | Selling Units | Single item |
| Package Type | carton | Single gross weight | 4.000 kg |
| Type | Hardness Tester | ||
Product Details
Products Display
The PHB-1 Pin Impact hardness tester is designed following the Brinell hardness test method. The test force is controlled by a shear pin. After reading the diameter of the indention with the reading microscope, the Brinell hardness value can be obtained from the look up table.
This kind of hammer impact Brinell hardness tester is capable of testing from small to very large specimens. It is especially suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut. The test can be completed in any direction to test the hardness of upper, lower and lateral part of the specimen.
The PHB-1 Pin Impact hardness tester can be widely used to test the hardness of forgings, castings, steels, nonferrous metal and its alloy products, and to test the hardness of annealed, normalizing and tempered mechanical parts.
Compared to the rebound type hardness tester, the Brinell hammer hit tester has many advantages such as higher precision, fewer factors affecting accuracy and lower requirement on the surface roughness. The test result meets the requirements of most drawings without conversion and is more widely accepted in the international business.
Product Description
Features of PHB-1 Pin Impact Brinell hardness tester
Test Method
This Brinell hardness machine applies Brinell hardness test method
Force Value Consistency
Good force value consistency, no influence by operator.
High Accuracy
Good repeatability and high accuracy. The accuracy is the same as desk tester. It could replace Leeb hardness tester in low accuracy and reliability.
Simple Operation
Simple and flexible operation.Only consume 1 piece of cheap shear pin for each test.
Technical Parameters of PHB-1 Pin Impact Brinell Hardness Tester
Test Force 1,580 kgf
Indenter: 7.26mm Steel Ball Indenter,
test range 100~350HBW
4mm Carbide Ball Indenter
test range 350~650HBW
Indicator Error: ≤5% Comply with ISO, ASTM
Repeatability Error: ≤5% Comply with ISO, ASTM
Test Range: 100~650HBW
Net Weight : 0.8 kg
Application: Castings, Forgings, Steel Products, Heat Treatment
Package of PHB-1 Pin Impact Brinell Hardness Tester
Trading Area
Global