Overview
| Front wheel axle | Mixing depth | ||
| Feed inlet height | Leg span | ||
| Loading quality | Climb box spacing | ||
| voltage | Transmission | ||
| Gas consumption | Discharge method | screw | |
| Directional control method | Concrete slump | ||
| Mixing tank conveying capacity | Overall weight | 2 tons | |
| service life | Sand conveying capacity | ||
| Dust concentration during operation | Processing customization | yes | |
| Conveying pipe diameter | Fabric radius | ||
| Track width/front | Rotation method | ||
| Working radius | Aggregate size | ||
| Delivery pressure | Loading height | ||
| Aggregate size | Compacted thickness | ||
| Maximum aggregate size | 1/3 | Hopper lifting speed | 10 meters/minute |
| Theoretical concrete conveying capacity | 12 square meters per hour | Measurement accuracy of asphalt powder | |
| Overall dimensions | 6+1.5+2.3 meters | control mode | time |
| Conveying distance | Continuous adjustable injection volume | ||
| Mixing cylinder capacity | New and old degree | ||
| Cement silo | lift | ||
| Independent height | Concrete outlet pressure | ||
| brand | Jinyi | Track gauge | |
| Tower body section | Maximum outlet pressure of concrete | nine | |
| Paving width | Storage hopper capacity | ||
| Supporting host model | productivity | ||
| Effective lifespan | Sieve size | ||
| Inner diameter of conveying pipe | Rotor capacity increase | ||
| Number of vibrations per minute | Traveling mechanism | ||
| Auxiliary brake | Mixing drum speed | four | |
| Composition structure | High work efficiency | ||
| displacement | granularity | ||
| Gradient | speed | ||
| Aggregate conveying capacity | Height of the upper opening of the feeding hopper from the ground | ||
| Applicable models | processing capacity | ||
| Outlet height | Climbing ability | ||
| Horizontal length of boom | Type of concrete machinery | Fabric spreader | |
| Net weight | Shelf life | ||
| Flatness | Excitation force | ||
| Water pump flow rate | Stone size | ||
| Rod head length | Concrete pipe diameter | ||
| amplitude | Water pump model of water supply system | ||
| Motor power | 8 kW | Pump shaft position | |
| Discharge capacity | Accelerator additive | ||
| Wheelbase | End hose | ||
| Conveying pipe diameter | Mixer model | ||
| Pitch angle | current | ||
| Discharge residual rate | Continuously adjustable dosage of accelerator | ||
| Balancing weight | Feed speed | ||
| Cross slope error | system pressure | ||
| Discharge speed | Paving thickness | ||
| horsepower | Track width/rear | ||
| System flow | Number of poles | ||
| Number of impellers | Customized or not | ||
| Is it the original factory | Is it customizable | ||
| Inclination angle of mixing drum | Rated discharge capacity | five | |
| stroke | Recovery amount | ||
| Number of trips | Mixing drum length | ||
| Theoretical conveying capacity of concrete | eight | Degree of crushing | |
| Cement screw machine | Delivery distance | ||
| Applicable water cement ratio | Rated feed capacity | seven |
Product Details
Jinyi Concrete Small Prefabricated Block Distribution Machine Automation Production Line.
Used for the construction of various types of curbstones and curbstones on outdoor roads and bridges, highways, airports, national highways, urban roads, residential areas, etc., such as the production of hexagonal slope protection, U-shaped drainage ditches, side ditch cover plates, skeleton water blocking, road surveying stones, handhole well cover plates, soil shoulder precast blocks, arch skeleton slope protection, cutting maintenance steps, and other prefabricated projects.
The various specifications of U-shaped drainage ditches, curbstones, and side ditch covers produced by automated production machinery and equipment for prefabricated block fabric machines are widely used in water conservancy and road and bridge engineering construction. Such as high-speed rail, Maluoyazi, water conservancy engineering, road and bridge engineering construction, etc. This machine can produce various specifications of U-shaped drainage ditches, side ditch covers, curbstones, etc., with good texture, strong density, and compliance with the strength grade of cement products specified by the country. It is an essential machine for the production and construction of high-speed sections and road and bridge engineering. This machine is divided into standard and customized versions. It requires 2-3 people to complete the operation step by step, and can produce up to 10 cubic meters of parts per hour. It is a sharp tool for producing U-shaped drainage ditches
A concrete prefabricated component production equipment only requires three people, one person to operate the mold, assist with the mold, one person to operate the joystick, and one person to operate a forklift to transfer the formed prefabricated components to the drying yard. The specific operation process is as follows: 1. Discharge from the mixing station, level the rail, and vibrate multiple molds on the roller table. 2. The material is cut using a double helix device, and the roller table can be vibrated and formed within 10 seconds after cutting, and transported to the conveying port of the roller table. 3. Accumulate and form prefabricated blocks, which are transported by forklifts to the drying yard,
