Biaxial Plastic Geogrid

Bidirectional plastic geogrid is suitable for various types of embankment and roadbed reinforcement, slope protection, tunnel wall reinforcement, as well as permanent bearing foundation reinforcement for large airports, parking lots, docks and freight yards.

1. Bidirectional plastic geogrids are used to increase the bearing capacity of road (ground) foundations and extend their service life.

2. Bidirectional geogrid is used to prevent road (ground) collapse or crack formation, and to maintain the appearance and tidiness of the ground.

3. The bidirectional geogrid is used for convenient construction, time-saving, labor-saving, shortened construction period, and reduced maintenance costs.

4. Bidirectional geogrids are used to prevent cracks in culverts.

5. Bidirectional geogrids are used to enhance soil slopes and prevent soil erosion.

6. The bidirectional plastic geogrid is used to reduce the thickness of the cushion layer and save costs.

7. Bidirectional geogrids are used to support the stability and greening environment of slope grass planting mats

Excavate the foundation bed, set up a sand cushion layer (with a height difference of no more than 10cm), roll it into a platform, and lay a grid. The longitudinal direction should be consistent with the main force direction, with a longitudinal overlap of 15-20cm and a transverse 10cm. The overlap should be tied with plastic tape and fixed to the ground with U-nails every 1.5-2m on the laid grid. The laid geogrid should be backfilled with soil in a timely manner, and the number of layers of geogrid laid depends on technical requirements.