UY600 battery charger specification Product Features l Intelligent temperature control fan l Circuit topology : Current Half-bridge type l Voltage and current display and the charge curve can be set arbitrarily l Dual-color LED charging status display l MCU and intelligent PWM IC control ,full automatic transition of CC,CV and Float/Cut-off, meet the demands for different Curve. l Protections: Over Current, Over Voltage, Over temperature, Short Circuit, Reverse Polarity, shut off or trickle and anti-reverse charge l Aluminum case, Robust, Elegant and Reliable Output | Rated output | Refer to output reference | | Voltage setting accuracy | +/-1% | 110/220Vac input | Total output voltage adjustment rate | 1% | Power adjustment rate and load adjustment rate | Ripple | <=output voltage 1% | Main output (board edge) (Test with adding 0.1uF ceramic capacitor and 10uF tantalum capacitor filter at the output and the bandwidth is 20MHz) | Output voltage overshoot | | Overshoot/undershoot control in a reasonable range | Short Circuit Protection (SCP) | Protect the power from damage | Relay off, no output | Output isolation | | Safety standards | Output Over Current Protection (OCP) | Disconnected the output | The charger enter the standby state protection, when output current exceeds the max. charging current. | Output Over Voltage Protection (OVP) | PWM off | The charger enters the standby state protection, when output voltage exceeds the max. charging voltage | Over-temperature protection | Automatic recovery | When the internal temperature over 85 degrees, stop | Reverse Polarity Protection | Automatic recovery | Relay off, no output | Product Name | UY600 BATTERY CHARGER | Brand Name | YEWY | Model Number | UY600 | Input Voltage | 110-220Vac | Frequency | 50~60HZ | N.W | 2.5KG | Dimension | 208*120*70mm | Efficiency | 88% | Leakage Current | <=0.75mA | Operating humidity | 5%-95% RH Non-condensing | Altitude | 2000m | Operating Temperature | -20℃—+40℃ | Storage Temperature | -40℃-+80℃ | Safety certifications | CE, CB, RoHS Directive-compliant | Suitable battery Type | Lead Acid/LiFePo4/Li-ion | Charging Time | Cut-off point for Li battery is 8% of CC and it can be set between 3-10%.(charging time:3-4 hours) | Transition for Lead acid charger is 25% of CC.(charging time:6-8 hours) | Protection | Over Current, Over Voltage, Over temperature, Short Circuit, Reverse Polarity, shut off or trickle and anti-reverse charge | Advantage | *MCU and intelligent PWM IC control ,full automatic transition of CC,CV and Float/Cut-off, meet the demands for different Curve. | *Aluminum case, Robust, Elegant and Reliable | Package Contents | *1xbattery charger *1xInput Wire *1xUser Manual This battery charger is your affordable necessity without sacrificing performance. It features an integrated MCU and PWM for power control. |
| | Application UY360L battery charger widely used for: Electric bicycles, electric scooters, golf carts, electric motorcycles, electric washing machine ,two wheeled vehicle, three wheeled vehicles, four wheeled vehicles,electric tricycle ,unmanned aircraft, Patrol Car, Sanitation Vehicle, electric cars,Electric forklift , Electric Pallet Truck, electric tools, unmanned aircraft, sightseeing cars,diplopod sweeper and so on.
|
|