Overview
| brand | Taiwan Plastic Steel | type | Standard material |
| producing area | Taiwan | Product name | POM |
| Imported or not | no | Article number | AL-645465004051 |
| Grade | FM090 | Processing level | Injection grade |
| Property level | High mobility | Usage level | Automotive components, home appliance components, electronic and electrical components |
| Sales method | Brand distribution | Manufacturer (place of origin) | Taiwan Plastic |
Product Details
POM/FM090/Taiwan Plastic
① Raw Material Description Section
Specification level: High injection standard automotive components, electronic appliances, household appliances, injection molding grade
This material is used for fasteners, snap fittings, hardware, gears, electronic parts, automotive parts, household appliances, bearings, and other injection parts
Note: Standard liquidity low mold scale
② Processing conditions
Processing conditions
③ Raw material technical data
| Performance Items | Test conditions [status] | test method | test data | Data unit | |
| Basic performance | Water absorption rate | 23 ℃ water | ASTM D-570 | zero point two two | % |
| physical property | proportion | ASTM D-792 | one point four one | ||
| Mechanical properties | compressive strength | 10% deformation | one thousand and one hundred | ||
| Bending elastic coefficient | twenty-six thousand | ||||
| Elongation rate | Breakpoint | sixty | % | ||
| impact strength | Concave side 23 ℃ 50% RH | ASTM D-256 | six point five | Kgfcm/cm | |
| ROCKWELL | one hundred and fifteen | R scale | |||
| Flexural strength | ASTM D-790 | nine hundred and fifty | Kgf/cm2 | ||
| compressive strength | 1% deformation | ASTM D-695 | three hundred and twenty | Kgf/cm2 | |
| hardness | ASTM D-785 | eighty | M scale | ||
| tensile strength | Subduction point | ASTM D-638 | six hundred and twenty | Kgf/cm2 | |
| Processing performance | Forming shrinkage rate | 3mm, 4in disc | 1.8-2.2 | % | |
| Thermal performance | Heat resistance | UL 94 | HB | ||
Trading Area
Global