Overview
| brand | SDWK/Sandwich | Product characteristics | MQT130 |
| Processing customization | no | model | MQT130/3.2 |
| Borehole diameter | 32mm | Overall dimensions | 2460mm~3670mm |
| alias | Mining pneumatic anchor rod machine | Drilling depth | 5m |
| Drilling angle | 25°, | weight | 46T~53T |
| Vertical shaft speed | two hundred and thirty | Drill pipe diameter | B19 |
| specifications | MQT130-3.2 | ||
Product Details
Please contact us for orders: 17373897710
Introduction to the mqt130 anchor drilling rig:
buyCoal mine anchor rod drilling machineFind Sandvik,Mqt130 anchor rod drilling machineDirect hair with a six-month free repair is commonly referred to asSmall anchor rod drilling machineUsing imported motors with high torque, fast speed, and high operabilityMqt130 anchor rod drilling machineIt can drill both roof bolt holes and anchor cable holes, as well as mix and install resin coated anchor rods and cables, without the need for other equipment,Coal mine anchor rod drilling machineIt can achieve one-time installation and tightening of anchor bolts and nuts.
Coal mine anchor rod drilling machineFeatures:
2. Gear type pneumatic motor, stable operation and high reliability.
3. The fiberglass air leg design has high reliability and longer service life.
Product parameters of mqt130 anchor rod drilling machine:
Working pressure MPa: 0.4/0.5/0.63; Idle speed r/min: ≥ 380/≥ 400/≥ 450; Load torque N.m: ≥ 180/≥ 210/≥ 270; Rated speed r/min: 150; Rated torque N.m: ≥ 95/≥ 130/≥ 170; Rated power kW: ≥ 1.5/≥ 2.8/≥ 3.5;
1/2 no-load speed r/min: ≥ 190/≥ 200/≥ 225; Torque N.m at 1/2 no-load speed: ≥ 90/≥ 110/≥ 160;
small-scaleAnchor rod drilling machineLeg thrust: Level 1 kN ≥ 5.4/≥ 7.2/≥ 9.0; Secondary kN: ≥ 4.0/≥ 5.3/≥ 6.8; Level 3 kN: ≥ 3.4/≥ 4.3/≥ 5.4; Noise pressure level dB (A): ≤ 93/≤ 95/≤ 98; Sound power level dB (A): ≤ 110/≤ 112/≤ 115; Gas consumption m3/min: ≤ 3.0/≤ 3.8/≤ 4.8; Propulsion force kN: ≥ 6.0/≥ 7.5/≥ 9.5;
Noise dB (A): ≤ 95/≤ 95/≤ 95; Flushing water pressure MPa: 0.6~1.2;
Hexagonal size of drill tail mm: 19 (22)
130 anchor rod drilling machineSeries: MQT-130/2.8J-A; MQT-130/2.8J-B; MQT-130/2.8J-C
Overall shrinkage height mm: 1126.5 ± 50/1276.5 ± 50/1426.5 ± 50
Overall elongation height mm: 2457.5 ± 50/3057.5 ± 50/3657.5 ± 50
coal mineAnchor rod drilling machineOverall weight kg: 46 ± 2/51 ± 2/53 ± 2
Custom instructions
Please contact us by phone if you need to place an order
Manufacturer, the company has a short production cycle and guaranteed product quality
2. Description
This product is for reference only and may vary depending on the product configuration. Please consult customer service for specific information.
3. Payment method
Delivery upon payment;
If the return is caused by the buyer's reasons, the buyer shall bear the logistics fees, inbound and outbound fees, etc; If the return is caused by the supplier's reasons, the supplier shall bear the logistics fees, inbound and outbound fees, etc.
When purchasing, please provide your company's information, mailing address, and recipient's phone number to the sales personnel. We will deliver to you by express delivery (the courier fee will be borne by us)
6. Contact us
Telephone and WeChat account: 17373897710