Overview
| brand | Chenxin | model | CX23222 |
| Batch number | CX200 | encapsulation | carton |
| packing | Minimum packaging quantity | ||
| material quality | EVA foam | producing area | Kunshan, Suzhou |
| Manufacturer/Place of Origin | Kunshan Jiashunda | density | 40g/cm3 |
| Implement quality standards | fifty-four thousand two hundred and ten | source | Foam sponge |
| feature | High rebound sponge | effect | Cushioning, shockproof, sealed |
| colour | black | size | customer demand |
| quantity | one hundred and twenty thousand | purpose | Packaging sponge |
Product Details
Our factory mainly producesSponge pad, EVA pad, foot pad, foam pad, anti slip pad, silicone pad, rubber pad, rebound rubber pad, PE pad, insulation pad, shock pad, rubber pad, plastic pad, foam pad, flannel pad, packaging pad, protective pad, dustproof cloth, sound-absorbing cotton, sealing strip, sponge strip, non-woven fabric, cloth pad products, PVC pad, non-woven fabric pad, sponge, foam rubber pad, foam rubber, foam product, foam strip, foam material
The loose suspended PVC resin with an average polymerization degree of 750-650K and a value of 59-55 for general foam has good processing performance and is easy to plasticize. It is used to produce large board foaming rate and easy to control the thickness of the board, which are two aspects of qualified products.
Sponges are mostly composed of polyisocyanates and polyols as materials, and the fundamental response is the reaction of polyols and polyisocyanates to produce polyurethane. The commonly used sponge science is called polyurethane soft foam rubber, and polyurethane is a common polymer material in daily life, which is used to make various "sponge" products. And elastic data for shock absorption and conflict resistance.
EPE (Expandable Polyethylene) is a type of expandable polyethylene, also known as pearl cotton. The staggered cross-linked closed cell structure is a high foam polyethylene product produced by extrusion of low-density polyethylene (LDPE) as the main material. It is composed of numerous independent bubbles generated by physical foaming of low-density polyethylene grease. Overcoming the defects of fragility, deformation, and poor recovery of general foam adhesive. It has many advantages such as water and moisture resistance, shock resistance, sound insulation, insulation, good plasticity, strong durability, recycling, environmental protection, strong impact resistance, and also has good chemical resistance.
This product comes in various colors and can provide good filling, insulation, and shock resistance. It can be used for single and double sided adhesive, and can also be made into various brackets, linings, and stamped into various shapes for shockproof packaging of various products such as electronic appliances, communication products, hardware, handicrafts, etc.
Cars, air conditioners, refrigerators, freezers, household appliances, engineering refrigeration, refrigeration and freezing, etc; Lining materials for ice skates and sports shoes, sports insoles, luggage back pads, surfboards, kneeling pads; The substrate for foam tape products; Thermal insulation materials for buildings such as ice storage, cold resistant buildings, light roofs, and building installations; Materials for car seats, interior, roof, foot mats, and sun visors; The field of shockproof cushioning packaging for electronic products such as electrical instruments and instruments. Automotive electronic accessories, air conditioning refrigeration kits, cold storage insulation materials, machine equipment sealing and buffering parts, heat setting parts, packaging liners for various instruments, medical cutting tools, measuring tools, sports goods, intelligent building blocks, etc.
Product features:
(1) Carcinogens without fluorescent brighteners
(2) Environmentally friendly and low odor
(3) High density, high hardness, and seamless connection of the coil material
(4) The thickness can reach ± 0.05mm
(5) Strictly follow the medical grade production formula
EVA foam is an environment-friendly plastic packaging material. EVA rubber and plastic products have been designed, processed and shaped, and their shockproof performance is better than traditional packaging materials such as polystyrene (foam). Compared with traditional shockproof packaging, EVA foam can be cut and shaped; Due to the significant difference in density, it can be more widely used and more in line with environmental requirements. It has advantages such as good moisture-proof and thermal insulation, buffering, chemical corrosion resistance, and seismic resistance, and has the characteristic of not absorbing water.
EVA, commonly known as foam, is an environmentally friendly packaging material. It is made of EVA foam. Overcoming the shortcomings of ordinary foam adhesive such as fragility, deformation, and poor recovery. It has many advantages such as water and moisture resistance, shock resistance, sound insulation, insulation, good plasticity, strong toughness, recycling, environmental protection, collision resistance, and strong anti slip and shock resistance. It also has good chemical resistance and is an ideal substitute for traditional packaging materials.
2: According to the density (hardness) of its products, it can be divided into 25 degrees, 38 degrees, 40 degrees, 45 degrees, 50 degrees, 55 degrees, 60 degrees, 65 degrees, 70 degrees, and 80 degrees; According to the color of its products, it can be divided into various colors such as black, white, white, black, gray, yellow, green, red, coffee, orange, etc. (which can be foamed according to international color standards).
The thickness mainly includes: 0.3MM-60MM, and the thickness tolerance is generally around plus or minus 0.1MM
There are various thicknesses, densities, and colors to choose from, which can be rolled or molded into various shapes. The rubber pad has weather resistance, chemical resistance, buffering, sound absorption, and superior adhesion. It can be used in various styles such as insulation rubber pad, EVA rubber pad, etc. 1. The characteristic of EVA resin is that it has good properties, rubber like elasticity, and can still have flexibility at (50 ℃), good properties and surface gloss, good chemical properties, and resistance.
In general, EVA with an ethylene content of less than 5% mainly produces films, wires and cables, LDPE modifiers, adhesives, etc; EVA products with ethylene content ranging from 5% to 10% are elastic films, etc; EVA with an ethylene content of 20-28%, mainly used for hot melt adhesives and coating products; The ethylene content ranges from 5% to 45%, and the main products are films (including agricultural films) and sheets, injection molded and molded products, and hair.
In today's society, people's environmental awareness is constantly increasing, and improving environmental awareness should start from daily life and start from details. The application of environmentally friendly EVA foam materials in our daily lives is also increasing
Product name: EVA foam roll material
Common dimensions: 41 ^ ^ (1040mm)/42 ^ ^ (1070mm)
Product thickness: above 0.3mm
Product packaging:
100 meters/roll, 200 meters/roll, 300 meters/roll
Product features:
The EVA foam substrate produced is mainly suitable for EVA foam tape coated with oil glue and thermosol, with main specifications of 41 "(1040mm) and 42" (1070mm). The entire roll does not cause any blisters that may penetrate the adhesive, and there are no manual joints (no OPP or textured paper are used for pasting). The uniformity of the transverse section of the entire roll material is 0.05mm, which can be safely cut and does not produce layered hollows.
Customized according to customer needs, size, material, thickness, color, hardness, etc. Welcome to inquire or come to the factory for observation.
EVA manufacturers and our processes are controlled layer by layer, and everyone values quality; Exchange sincerity for integrity, please rest assured of service.
The normal production of EVA substrate is a process that can be completed by three people, and we need six people to complete it, with strict quality control. After all product inspections, cut out all the parts of EVA that are prone to blistering, and then use an electric heating connection machine to connect it together (never use OPP and textured paper for connection), so that the entire roll of material has no joints or bubbles, and there will be no adhesive leakage when connected, making it easy for the production department to use.
The adhesive coating type EVA substrate formula has no adhesive phenomenon; The uniform thickness of the entire material can completely avoid the phenomenon of layering after coating and cutting; Domestic ultra-thin substrate production technology, industry 0.3mm seamless coil uniformity to 0.05mm.